| |
Main
Date: 05 Oct 2006 16:37:55
From: Knotbob
Subject: zebrawood guitar cabinet
|
I'm going to build a guitar display cabinet and I have some
zebrawood veneer ordered to cover the plywood side panels, the
partitions in the open top cabinet and probably the inside top of the
open cabinet. I will use solid stock for edge trimmimg.
The top cabinet and bottom cabinet will be installed seperately
and I'm going to use black glass mosaic tile on the wall in between
them and on the top of the bottom cabinet. I was going to use mirrors
but I think the black tile will reflect the hanging guitars nicely.
The bottom cabinet will store guitar cases and won't be finished
inside but I was going to make raised panel doors with zebrawood to
enclose it. I obviously like the striped effect but I'm wondering if I
use the zebrawood for all the solid stock edging and cabinet doors that
it will it be way to much zebrawood.
Should I use a different less dramatic wood for the solid edge
trim, the cabinet door rails and stiles or maybe even paint them a
glossy piano black? I've googled up a few things that used walnut with
zebrawood but I think that might dull the look and I wonder if a sharp
contrast will work better.
Any brilliant color and style ideas will be appreciated.
Robert Smith
|
|
| |
Date: 06 Oct 2006 00:08:23
From: Puff Griffis
Subject: Re: zebrawood guitar cabinet
|
I think a nice ebonized maple would look great.
Puff
"Knotbob" <knotbob@comcast.net > wrote in message =
news:1160091475.167104.194770@e3g2000cwe.googlegroups.com...
> I'm going to build a guitar display cabinet and I have some
> zebrawood veneer ordered to cover the plywood side panels, the
> partitions in the open top cabinet and probably the inside top of the
> open cabinet. I will use solid stock for edge trimmimg.
> The top cabinet and bottom cabinet will be installed seperately
> and I'm going to use black glass mosaic tile on the wall in between
> them and on the top of the bottom cabinet. I was going to use mirrors
> but I think the black tile will reflect the hanging guitars nicely.
> The bottom cabinet will store guitar cases and won't be finished
> inside but I was going to make raised panel doors with zebrawood to
> enclose it. I obviously like the striped effect but I'm wondering if I
> use the zebrawood for all the solid stock edging and cabinet doors =
that
> it will it be way to much zebrawood.
> Should I use a different less dramatic wood for the solid edge
> trim, the cabinet door rails and stiles or maybe even paint them a
> glossy piano black? I've googled up a few things that used walnut with
> zebrawood but I think that might dull the look and I wonder if a sharp
> contrast will work better.
> Any brilliant color and style ideas will be appreciated.
>=20
> Robert Smith
>
|
| |
Date: 06 Oct 2006 10:27:37
From: Knotbob
Subject: Re: zebrawood guitar cabinet
|
To ebonize maple do you mean a black stain or do you fume it like
oak? Would you use a figured maple or plain sawn?
Thanks, (finishing is my least knowledgeable subject - I'll
google it while waiting for your reply)
Robert
Puff Griffis wrote:
> I think a nice ebonized maple would look great.
> Puff
>
> "Knotbob" <knotbob@comcast.net> wrote in message news:1160091475.167104.194770@e3g2000cwe.googlegroups.com...
> > I'm going to build a guitar display cabinet and I have some
> > zebrawood veneer ordered to cover the plywood side panels, the
> > partitions in the open top cabinet and probably the inside top of the
> > open cabinet. I will use solid stock for edge trimmimg.
> > The top cabinet and bottom cabinet will be installed seperately
> > and I'm going to use black glass mosaic tile on the wall in between
> > them and on the top of the bottom cabinet. I was going to use mirrors
> > but I think the black tile will reflect the hanging guitars nicely.
> > The bottom cabinet will store guitar cases and won't be finished
> > inside but I was going to make raised panel doors with zebrawood to
> > enclose it. I obviously like the striped effect but I'm wondering if I
> > use the zebrawood for all the solid stock edging and cabinet doors that
> > it will it be way to much zebrawood.
> > Should I use a different less dr
amatic wood for the solid edge
> > trim, the cabinet door rails and stiles or maybe even paint them a
> > glossy piano black? I've googled up a few things that used walnut with
> > zebrawood but I think that might dull the look and I wonder if a sharp
> > contrast will work better.
> > Any brilliant color and style ideas will be appreciated.
> >
> > Robert Smith
> >
|
| | |
Date: 07 Oct 2006 17:00:55
From: Prometheus
Subject: Re: zebrawood guitar cabinet
|
On 6 2006 10:27:37 -0700, "Knotbob" <knotbob@comcast.net > wrote:
> To ebonize maple do you mean a black stain or do you fume it like
>oak? Would you use a figured maple or plain sawn?
> Thanks, (finishing is my least knowledgeable subject - I'll
>google it while waiting for your reply)
It's tough to ebonize maple, I've tried several techniques, and they
mostly resulted in ruined maple. On top of that, the general texture
of maple and zebra wood don't match that well- ebonizing would look
nice, but I'd go with something like Ash or Oak that takes dye or
stain well, and has a relatively straight grain. Either that, or use
Birch and paint it that glossy black you were thinking of- no law
against that, and it can look really nice.
If you feel you'd like to use maple, if might be easiest to tint a can
of laquer black and build a lot of thin coats until you get the look
you want. I haven't done this, so I can't recommend a suitable dye
for it- but they might be able to help you at a paint store.
> Robert
>
>
>
>Puff Griffis wrote:
>> I think a nice ebonized maple would look great.
>> Puff
>>
>> "Knotbob" <knotbob@comcast.net> wrote in message news:1160091475.167104.194770@e3g2000cwe.googlegroups.com...
>> > I'm going to build a guitar display cabinet and I have some
>> > zebrawood veneer ordered to cover the plywood side panels, the
>> > partitions in the open top cabinet and probably the inside top of the
>> > open cabinet. I will use solid stock for edge trimmimg.
>> > The top cabinet and bottom cabinet will be installed seperately
>> > and I'm going to use black glass mosaic tile on the wall in between
>> > them and on the top of the bottom cabinet. I was going to use mirrors
>> > but I think the black tile will reflect the hanging guitars nicely.
>> > The bottom cabinet will store guitar cases and won't be finished
>> > inside but I was going to make raised panel doors with zebrawood to
>> > enclose it. I obviously like the striped effect but I'm wondering if I
>> > use the zebrawood for all the solid stock edging and cabinet doors that
>> > it will it be way to much zebrawood.
>> > Should I use a different less dr
>amatic wood for the solid edge
>> > trim, the cabinet door rails and stiles or maybe even paint them a
>> > glossy piano black? I've googled up a few things that used walnut with
>> > zebrawood but I think that might dull the look and I wonder if a sharp
>> > contrast will work better.
>> > Any brilliant color and style ideas will be appreciated.
>> >
>> > Robert Smith
>> >
|
| | | |
Date: 08 Oct 2006 18:15:07
From: Stephens
Subject: Re: zebrawood guitar cabinet
|
Recently, my daughter, a film maker, went to a party where she was dressed
as a pirate. I made her a compass like the one Johnny Depp used in Pirates
of the Caribbean. I ebonized the wood by wiping India ink onto the wood.
After each application dried, I did it again, for four or five coats. The
ink penetrates relatively deeply into the wood, thereby not looking like a
surface coat. Then, with a bit of wax on top, it looked just like ebony. A
hit of the grain shows through, but it is very subtle.
Ken
"Prometheus" <noneofyer@business.org > wrote in message
news:5f8gi294t9q80u8um5ad3dg4vc749al3c4@4ax.com...
> On 6 2006 10:27:37 -0700, "Knotbob" <knotbob@comcast.net> wrote:
>
>> To ebonize maple do you mean a black stain or do you fume it like
>>oak? Would you use a figured maple or plain sawn?
>> Thanks, (finishing is my least knowledgeable subject - I'll
>>google it while waiting for your reply)
>
> It's tough to ebonize maple, I've tried several techniques, and they
> mostly resulted in ruined maple. On top of that, the general texture
> of maple and zebra wood don't match that well- ebonizing would look
> nice, but I'd go with something like Ash or Oak that takes dye or
> stain well, and has a relatively straight grain. Either that, or use
> Birch and paint it that glossy black you were thinking of- no law
> against that, and it can look really nice.
>
> If you feel you'd like to use maple, if might be easiest to tint a can
> of laquer black and build a lot of thin coats until you get the look
> you want. I haven't done this, so I can't recommend a suitable dye
> for it- but they might be able to help you at a paint store.
>
>> Robert
>>
>>
>>
>>Puff Griffis wrote:
>>> I think a nice ebonized maple would look great.
>>> Puff
>>>
>>> "Knotbob" <knotbob@comcast.net> wrote in message
>>> news:1160091475.167104.194770@e3g2000cwe.googlegroups.com...
>>> > I'm going to build a guitar display cabinet and I have some
>>> > zebrawood veneer ordered to cover the plywood side panels, the
>>> > partitions in the open top cabinet and probably the inside top of the
>>> > open cabinet. I will use solid stock for edge trimmimg.
>>> > The top cabinet and bottom cabinet will be installed seperately
>>> > and I'm going to use black glass mosaic tile on the wall in between
>>> > them and on the top of the bottom cabinet. I was going to use mirrors
>>> > but I think the black tile will reflect the hanging guitars nicely.
>>> > The bottom cabinet will store guitar cases and won't be finished
>>> > inside but I was going to make raised panel doors with zebrawood to
>>> > enclose it. I obviously like the striped effect but I'm wondering if I
>>> > use the zebrawood for all the solid stock edging and cabinet doors
>>> > that
>>> > it will it be way to much zebrawood.
>>> > Should I use a different less dr
>>amatic wood for the solid edge
>>> > trim, the cabinet door rails and stiles or maybe even paint them a
>>> > glossy piano black? I've googled up a few things that used walnut with
>>> > zebrawood but I think that might dull the look and I wonder if a sharp
>>> > contrast will work better.
>>> > Any brilliant color and style ideas will be appreciated.
>>> >
>>> > Robert Smith
>>> >
>
|
| | | | |
Date: 15 Oct 2006 02:44:47
From: Prometheus
Subject: Re: zebrawood guitar cabinet
|
On Sun, 8 2006 18:15:07 -0400, "Stephens"
<kstephens43@comcast.net > wrote:
>Recently, my daughter, a film maker, went to a party where she was dressed
>as a pirate. I made her a compass like the one Johnny Depp used in Pirates
>of the Caribbean. I ebonized the wood by wiping India ink onto the wood.
>After each application dried, I did it again, for four or five coats. The
>ink penetrates relatively deeply into the wood, thereby not looking like a
>surface coat. Then, with a bit of wax on top, it looked just like ebony. A
>hit of the grain shows through, but it is very subtle.
I know the thread is getting a little old, but did you do this with
maple? I had terrible results, but I only tried a single coat. Would
be good to know if it works with multiple applications in the future.
Though I'd agree, India Ink has given me the best results when it
comes to ebonizing- just not with maple.
|
|
