| |
Main
Date: 11 Oct 2006 21:48:15
From: Adam
Subject: whats wrong with my plainer??
|
I've got a 12" plainer and the board as it is going through it comes out
planed mre in the center of the board compared to the side, more of the
center is down than the sides, any idea what could be causing this?
I have tried to adjust the table but this has done nothing
|
|
| |
Date: 12 Oct 2006 04:21:13
From: Tom Gardner
Subject: Re: whats wrong with my plainer??
|
"Adam" <none@none.invalid > wrote in message
news:zEdXg.3275$HP.1046@trndny08...
> I've got a 12" plainer and the board as it is going through it comes out
> planed mre in the center of the board compared to the side, more of the
> center is down than the sides, any idea what could be causing this?
>
> I have tried to adjust the table but this has done nothing
>
>
Are you sure that your boards aren't cupped?
|
| |
Date: 12 Oct 2006 02:41:44
From: Edwin Pawlowski
Subject: Re: whats wrong with my plainer??
|
"Adam" <none@none.invalid > wrote in message
news:zEdXg.3275$HP.1046@trndny08...
> I've got a 12" plainer
How does it work? Do you put in fancy and elaborate stuff and it comes out
simplified?
|
| | |
Date: 14 Oct 2006 11:30:04
From: J. Clarke
Subject: Re: whats wrong with my plainer??
|
"Edwin Pawlowski" <esp@snet.net > wrote in message
news:IXhXg.21939$Ij.11242@newssvr14.news.prodigy.com...
>
> "Adam" <none@none.invalid> wrote in message
> news:zEdXg.3275$HP.1046@trndny08...
>> I've got a 12" plainer
>
> How does it work? Do you put in fancy and elaborate stuff and it comes
> out simplified?
Sounds like one power tool the Amish could accept <g >.
|
| |
Date: 11 Oct 2006 17:35:23
From: Andy
Subject: Re: whats wrong with my plainer??
|
On 11, 6:35 pm, "R. Pierce Butler" <nos...@yahoo.com > wrote:
> "Adam" <n...@none.invalid> wrote innews:zEdXg.3275$HP.1046@trndny08:
>
> > I've got a 12" plainer and the board as it is going through it comes out
> > planed mre in the center of the board compared to the side, more of the
> > center is down than the sides, any idea what could be causing this?
>
> > I have tried to adjust the table but this has done nothingTime to get your dial indicator out and check your blades.
There's an article in the current issue of Wood magazine (just received
today) about setting up and tweaking planers. Maybe that would be a
good resource.
Andy
|
| | |
Date: 12 Oct 2006 04:46:00
From: R. Pierce Butler
Subject: Re: whats wrong with my plainer??
|
"Andy" <aenewhouse@gmail.com > wrote in
news:1160613323.016102.309660@c28g2000cwb.googlegroups.com:
>
>
> On 11, 6:35 pm, "R. Pierce Butler" <nos...@yahoo.com> wrote:
>> "Adam" <n...@none.invalid> wrote innews:zEdXg.3275$HP.1046@trndny08:
>>
>> > I've got a 12" plainer and the board as it is going through it
>> > comes out planed mre in the center of the board compared to the
>> > side, more of the center is down than the sides, any idea what
>> > could be causing this?
>>
>> > I have tried to adjust the table but this has done nothingTime to
>> > get your dial indicator out and check your blades.
>
> There's an article in the current issue of Wood magazine (just
> received today) about setting up and tweaking planers. Maybe that
> would be a good resource.
> Andy
>
>
Ther is a good video on google video that shows you how to adjust the
blades and more.
|
| |
Date: 11 Oct 2006 22:35:49
From: R. Pierce Butler
Subject: Re: whats wrong with my plainer??
|
"Adam" <none@none.invalid > wrote in news:zEdXg.3275$HP.1046@trndny08:
> I've got a 12" plainer and the board as it is going through it comes out
> planed mre in the center of the board compared to the side, more of the
> center is down than the sides, any idea what could be causing this?
>
> I have tried to adjust the table but this has done nothing
>
>
Time to get your dial indicator out and check your blades.
|
| |
Date: 11 Oct 2006 15:24:15
From: eganders
Subject: Re: whats wrong with my plainer??
|
Adam wrote:
> I've got a 12" plainer and the board as it is going through it comes out
> planed mre in the center of the board compared to the side, more of the
> center is down than the sides, any idea what could be causing this?
>
> I have tried to adjust the table but this has done nothing
You should check the blade to see if the blade clamp is loose or that
wood has not worked its way under the blade because the clamp is loose,
bending the blade out.
|
| |
Date: 12 Oct 2006 12:40:04
From: Gus
Subject: Re: whats wrong with my plainer??
|
On 11, 10:41 pm, "Edwin Pawlowski" <e...@snet.net > wrote:
> "Adam" <n...@none.invalid> wrote in messagenews:zEdXg.3275$HP.1046@trndny08...
>
> > I've got a 12" plainerHow does it work? Do you put in fancy and elaborate stuff and it comes out
> simplified?
ROFLMAO !
|
|
