| |
Main
Date: 14 Nov 2006 08:30:01
From: foster239
Subject: Making coasters from a small log
|
I would like to make coasters from a small (3-4") log by crosscutting
them on a bandsaw about =BC" thick. Would anybody have any
recommendations on what kind of wood/log to use that would not
"check" and would have an interesting grain structure?
Thanks
|
|
| |
Date: 14 Nov 2006 13:59:37
From: bent
Subject: Re: Making coasters from a small log
|
just a thought but if you cut it green you may be able to relieve some
internal stresses by drilling a hole in the center, don't know what if any
wood survive though.
----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
|
| | |
Date: 14 Nov 2006 14:06:39
From: bent
Subject: Re: Making coasters from a small log
|
or maybe recess a real coaster into the center
----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
|
| | | |
Date: 14 Nov 2006 14:13:48
From: bent
Subject: Re: Making coasters from a small log
|
the real wood stores I have been too have the real exotic cuts but also a
greater portion of the tree, like 2-inch thick slices from the trunk with
the bark on for projects like coffee tables or desks. Huge veneer sheets
and all kinds of wood options. If you are near a big city, and maybe if
you're not, I'd see if there are any real would-only stores to look into.
Its a treat.
----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
|
| |
Date: 14 Nov 2006 10:34:13
From: Mr. G D Geen
Subject: Re: Making coasters from a small log
|
I always favourd Mesquite for this. My father has made several belt
buckles from cross sections of Mesquite wood and they are beautiful.
Somtimes there are interesting colour changes in tree rings. -G
foster239 wrote:
> I would like to make coasters from a small (3-4") log by crosscutting
> them on a bandsaw about ¼" thick. Would anybody have any
> recommendations on what kind of wood/log to use that would not
> "check" and would have an interesting grain structure?
>
> Thanks
>
|
| |
Date: 14 Nov 2006 15:19:55
From: J T
Subject: Re: Making coasters from a small log
|
Tue, Nov 14, 2006, 8:30am (EST-3) foster.239@osu.edu (foster239) doth
query:
I would like to make coasters from a small (3-4") log by crosscutting
them on a bandsaw about =BC" thick. Would anybody have any
recommendations on what kind of wood/log to use that would not "check"
and would have an interesting grain structure?
To my mind about any wood would have an interesting gain structure. =
Probably your best bet would be already dried wood. Other than
that, experiment a bit - slice a load of potential coasters, put 'em in
a large paper bag with sawdust and let the lot dry for awhile. Or, try
microwaving the wood, either before, or after cutting. Experiment.
Google is your friend
JOAT
Democratic justice. One man, one rock.
|
| |
Date: 15 Nov 2006 06:09:36
From: Prometheus
Subject: Re: Making coasters from a small log
|
On 14 Nov 2006 08:30:01 -0800, "foster239" <foster.239@osu.edu > wrote:
>I would like to make coasters from a small (3-4") log by crosscutting
>them on a bandsaw about ¼" thick. Would anybody have any
>recommendations on what kind of wood/log to use that would not
>"check" and would have an interesting grain structure?
Any chance of convincing you to rip that log instead?
|
| |
Date: 20 Nov 2006 21:38:42
From: Russ Stanton
Subject: Re: Making coasters from a small log
|
"foster239" <foster.239@osu.edu > wrote in message
news:1163521801.082361.58630@m73g2000cwd.googlegroups.com...
I would like to make coasters from a small (3-4") log by crosscutting
them on a bandsaw about ¼" thick. Would anybody have any
recommendations on what kind of wood/log to use that would not
"check" and would have an interesting grain structure?
Thanks
Would soaking the fresh cut cross section in Pentacryl and then finishing
with poly work?
Russ
|
|
