| |
Main
Date: 03 Nov 2006 23:44:12
From: GLiddy
Subject: Installing a Shelix cutter head
|
Good Day Gentlemen,
Iv'e decided to get a Yorkcraft jointer. The machine comes with 3 steel
knives installed in the cutter head. They also have a Shelix cutterhead
available, which I am planning on buying along with the jointer. So, my plan
is to use the jointer with the steel knives until they dull and then install
the Shelix cutterhead. My question is, has anyone done this? I'm
mechanically inclined, but I'm wondering about the degree of difficulty for
this task. I would be very grateful if anyone has any info on this process.
Thanks
|
|
| |
Date: 03 Nov 2006 15:52:27
From: tom
Subject: Re: Installing a Shelix cutter head
|
Here ya go:
http://groups.google.com/group/rec.woodworking/browse_thread/thread/d75540192984590b/d69e09396069b842?lnk=gst&q=+shelix+cutterhead&rnum=3#d69e09396069b842
GLiddy wrote:
> Good Day Gentlemen,
>
> Iv'e decided to get a Yorkcraft jointer. The machine comes with 3 steel
> knives installed in the cutter head. They also have a Shelix cutterhead
> available, which I am planning on buying along with the jointer. So, my plan
> is to use the jointer with the steel knives until they dull and then install
> the Shelix cutterhead. My question is, has anyone done this? I'm
> mechanically inclined, but I'm wondering about the degree of difficulty for
> this task. I would be very grateful if anyone has any info on this process.
>
> Thanks
|
| | |
Date: 04 Nov 2006 17:31:54
From: GLiddy
Subject: Re: Installing a Shelix cutter head
|
Thanks Tom. I suspected that it would be an easy task, but the I would a
press. Once again thanks.
|
|
