| |
Main
Date: 19 Oct 2006 13:19:44
From: Nash
Subject: Freud dado SD308 shim dislodged
|
I have a friend that has this old Freud dado set. Apparently there are
some shims attached to the outer blades, and one has dislodged. He is
wondering how to re-attach it without adding thickness to the blade.
Anyone familiar with this set up?
|
|
| |
Date: 20 Oct 2006 03:16:27
From: Rick's Cabinet Shop
Subject: Re: Freud dado SD308 shim dislodged
|
I used double stick tape on my oldham and it's stuck for 2 years now.
--
Rick Nagy
Johnstown, PA
nospamrickscabinetshop@verizon.net - Remove nospam to email me
Be sure to check out my website at http://www.rickscabinetshop.com
"Nash" <tjnash612@hotmail.com > wrote in message
news:1161289184.692025.87630@f16g2000cwb.googlegroups.com...
>I have a friend that has this old Freud dado set. Apparently there are
> some shims attached to the outer blades, and one has dislodged. He is
> wondering how to re-attach it without adding thickness to the blade.
> Anyone familiar with this set up?
>
|
| |
Date: 20 Oct 2006 02:12:08
From: BobS
Subject: Re: Freud dado SD308 shim dislodged
|
"Nash" <tjnash612@hotmail.com > wrote in message
news:1161289184.692025.87630@f16g2000cwb.googlegroups.com...
>I have a friend that has this old Freud dado set. Apparently there are
> some shims attached to the outer blades, and one has dislodged. He is
> wondering how to re-attach it without adding thickness to the blade.
> Anyone familiar with this set up?
>
If it's a metal shim - magnetize it and stick it to the blade.
Bob S.
|
| |
Date: 20 Oct 2006 12:50:43
From: Larry Spitz
Subject: Re: Freud dado SD308 shim dislodged
|
Nash wrote:
> I have a friend that has this old Freud dado set. Apparently there are
> some shims attached to the outer blades, and one has dislodged. He is
> wondering how to re-attach it without adding thickness to the blade.
> Anyone familiar with this set up?
>
I have the same dado set and had the same problem. I used contact cement
to reattach the shim to the surface of the blade. I doubt that the
contact cement added 0.05 mm to the thickness, which I think is
completely negligible.
|
|
