| |
Main
Date: 03 Nov 2006 03:55:42
From: Don Dando
Subject: Drill Press speed
|
It's a function of finding the motor speed, then doing some ratio math using
the pulley sizes.
I.E.; Motor speed 1000 rpm.
Motor pulley 2"
Quill Pulley 4"
Resulting chuck speed 500 rpm.
Don Dando
|
|
| |
Date: 03 Nov 2006 04:25:18
From: Mike
Subject: Re: Drill Press speed
|
Don Dando wrote:
> It's a function of finding the motor speed, then doing some ratio math using
> the pulley sizes.
>
> I.E.; Motor speed 1000 rpm.
> Motor pulley 2"
> Quill Pulley 4"
> Resulting chuck speed 500 rpm.
> Don Dando
Is there a reason that you are posting a new topic instead of replying
to the original post? Your answers have good information, why not add
them to the post so that others might find them during a search.
Mike
|
| | |
Date: 04 Nov 2006 04:55:03
From: CW
Subject: Re: Drill Press speed
|
Don't waste your time. No one has ever been successful at communicating with
this guy. Most of us kill filed him long ago.
"Mike" <mws200@gmail.com > wrote in message
news:1162556718.339153.285940@h54g2000cwb.googlegroups.com...
>
> Don Dando wrote:
> > It's a function of finding the motor speed, then doing some ratio math
using
> > the pulley sizes.
> >
> > I.E.; Motor speed 1000 rpm.
> > Motor pulley 2"
> > Quill Pulley 4"
> > Resulting chuck speed 500 rpm.
> > Don Dando
>
> Is there a reason that you are posting a new topic instead of replying
> to the original post? Your answers have good information, why not add
> them to the post so that others might find them during a search.
>
> Mike
>
|
|
