| |
Main
Date: 09 Oct 2006 15:07:41
From: Keith
Subject: Dc1100RC with Ecogate
|
I have a Jet DC1100A/RC with remote control and have tried to use the ecogate
system. The ecogate system supply's power to the DC directly. When a gate is
opened it supplies 120V to the DC. After a time out the Ecogate turns off the
120v circuit. Has anyone used a Jet dust collector with the ecogate or should I
use the money and just buy a larger DC and leave the gates all open
|
|
| |
Date: 09 Oct 2006 16:51:43
From: Keith
Subject: Re: Dc1100RC with Ecogate
|
Never mind. I have returned it because of a number of problems not related to my
dust collector.
|
| |
Date: 10 Oct 2006 11:48:18
From: B A R R Y
Subject: Re: Dc1100RC with Ecogate
|
Keith wrote:
> Has anyone used a Jet dust collector with the ecogate or should I
> use the money and just buy a larger DC and leave the gates all open
Why not simply put the gates in easily accessible locations?
I use a Long Ranger remote clipped to my pocket to switch my DC on and
off. All of my gates, except one, are easy to reach. My gates are
usually 3-4' off the ground and not far from the tool's power switch.
There's no rule that says the blast gate has to connect directly to the
tool outlet. My one difficult to reach gate is now equipped with a
cable / slide / knob mechanism so it can be opened from the front,
similar to the vent doors in 70's cars.
I find "automatic" blast gate systems to often be more trouble and
expense than they're worth.
|
| | |
Date: 10 Oct 2006 11:16:40
From: Keith
Subject: Re: Dc1100RC with Ecogate
|
Thanks Barry. I have ordered some more 4" hose to relocate the gate from under
my table saw to the side. I'm also looking at other ways to make the other gates
easier to reach. The idea is great but the electronics don't seem ready yet.
B A R R Y <balsapilot@yahoo.com > wrote:
>Keith wrote:
>> Has anyone used a Jet dust collector with the ecogate or should I
>> use the money and just buy a larger DC and leave the gates all open
>
>Why not simply put the gates in easily accessible locations?
>
>I use a Long Ranger remote clipped to my pocket to switch my DC on and
>off. All of my gates, except one, are easy to reach. My gates are
>usually 3-4' off the ground and not far from the tool's power switch.
>There's no rule that says the blast gate has to connect directly to the
>tool outlet. My one difficult to reach gate is now equipped with a
>cable / slide / knob mechanism so it can be opened from the front,
>similar to the vent doors in 70's cars.
>
>I find "automatic" blast gate systems to often be more trouble and
>expense than they're worth.
|
|
